Walnut
1960s Replogle ‘Comprehensive’ Illuminated Globe on Walnut Base
$650.001960s Replogle ‘Comprehensive’ globe composed of paper gores over plastic with a cast aluminum half-meridian all mounted to a walnut base equipped with two upright dividers for papers, letters, etc. A perfect desk accessory that additionally has a functional lighting mechanism (wiring is new, and lamp is operational).
Sans minor spots in places / light general wear, the globe is in very good, vintage condition. Walnut has been refinished; only minor wear (including a small spot, as shown) remains.
The globe itself measures 12″ in diameter.
The base alone is: D: 5.25″ x L: 12.5″
Including the base, the total measurements are: H 15″ x L 14″ x D 12″ (globe diameter).
Abstract Sculptural Walnut Puzzle Box Attributed to Richard Rothbard
Intriguing, sculptural puzzle box attributed to Richard Rothbard circa 1970s New Jersey, USA, but unsigned. Composed of solid walnut components, each removable with two shallow drawer compartments. Abstract design, but resembles a hand plucking a piece of fruit.
Measures: L: 7″ x D: 2.5″ x H: 6.25″
Adrian Pearsall for Craft Associates ‘Gondola’ Sofa in Walnut and Velvet
Model #2408 ‘Gondola’ sofa designed by Adrian Pearsall for Craft Associates in the 1960s. Composed of a sculpted walnut base which supports the frame. Three back cushions feature a single button / cushion, and the seat is one continuous cushion tufted and buttoned throughout. Bolsters offer additional support and comfort. Fully restored condition — walnut has been newly refinished, and sofa has been recovered in a luxurious Kravet ‘Gunmetal’ gray velvet. Foam and strapping are all new.
Additionally, we have the matching club chair Model #2406-C listed separately.
Sofa dimensions:
L: 101.1″
Height (frame): 26.5″
Height (including back cushions): 29.25″
D: 31.5″
Arm height: 20″
Arm height (with bolsters): 21.25″
Seat height: 18.25″.
Adrian Pearsall for Craft Associates ‘Wave’ Chaise Lounge in Coral Mohair
Luxurious, iconic Adrian Pearsall for craft associates (model 2147 CL) shapely récamier or chaise lounge roomy enough to accommodate two people. Recovered in a blood-orange or coral mohair with new foam. The decorative pillow attaches to the back with a snap-on strap and can be removed when not in use. Supported by four walnut, tapered legs newly refinished.
These were made in various depths; this is the deep version (67″ D x 32″ H x 37″ L).
The lowest seat height (lowest point of the tufting) is: 10″
The highest seat height (top of the leg rest ‘curve’) is: 14.25″.
Adrian Pearsall for Craft Associates Lounge Chair in Walnut and Velvet
Model #2406-C club or lounge chair designed by Adrian Pearsall for Craft Associates in the 1960s. Composed of a sculpted walnut base which supports the frame. The back cushion features a single button, and the seat is fully tufted and buttoned. Fully restored condition — walnut has been newly refinished, and chair has been recovered in a luxurious Kravet ‘Gunmetal’ grey velvet. Foam and strapping are all new.
Additionally, we have the matching ‘Gondola’ sofa (Model #2408) listed separately.
Chair dimensions:
H 26.75″
L 28.75″
D 33″
Arm height 21.25″
Seat height 17″.
Adrian Pearsall for Craft Associates Walnut Desk or Accent Chair Model #909
Uncommon model #909 dining / desk / side chair designed by Adrian Pearsall for Craft Associates. Solid walnut frame with molded plywood seat recovered in a multicolored tweed. Sculptural, modernist form with clean, exaggerated lines.
Appears with the corresponding barstool (model #907) in a 1950s Craft Associates catalog. Unmarked.
H 30.25″ x W 17″ x D 23″ x Seat Height: 17.5″
Adrian Pearsall for Craft Associates Walnut Lounge Chair and Ottoman
This rarely seen Adrian Pearsall lounge chair and ottoman set boasts a highly stylized sculpted walnut frame and armrests. Great lines and shape to both pieces. Magnificent texture and grain to the walnut, which is enhanced by the detail of the lime green tweed fabric. The Pirelli rubber straps on both chair and ottoman are new; the upholstery and foam has been replaced. Arm height of chair: 23″
Ottoman dimensions: H 16″ x W 25.25″ x D 21.5″
Chair dimensions: H: 33″ x W: 31.25″ x D: 25.5″ x Seat Height: 18″
American Modern Walnut Credenza
This small walnut credenza features two sliding doors which open to reveal three small drawers to the left atop open storage, and three sizable drawers to the right. The simple, clean modern design of the cabinet is nicely contrasted by striking brass turned legs, which add an elegance to the piece. The cabinet shows only minor signs of wear; the brass legs show minor loss / wear from use.
H: 32″ x W: 47.75″ x D: 19″
Bertha Schaefer for Singer and Sons Italian Walnut Asymmetrical Desk
$9,500.00Diminutive midcentury angled student desk in Italian walnut designed by Bertha Schaefer for M. Singer & Sons (Model 2162 – USA, ca. 1955).
Often co-attributed to Gio Ponti, who also designed for Singer & Sons, but no such claim has been confirmed.
Features a shallow pencil drawer to the right and three drawers to the left (two drawers and a bottom filing cabinet drawer).
Sleek design with sharp lines and incredible wood grain occupying a small footprint (H: 29″ x L: 53.5″ x D: 26″).
Retains the “M. Singer & Sons New York Chicago” manufacturer’s label to the top drawer.
Very good, conservatively refinished condition with a couple of small, light surface dings, scuffs to the pencil drawer, and edge wear to the three drawer bank, as shown.
Pencil drawer interior measurement: H: 2.5″ x L: 17.5″ x D: 12″
Top two drawers interior measurement: H: 4.75″ x L: 13.88″ x D: 15.75″
Filing cabinet interior measurement (excluding hardware): H: 10″ x L: 12.13″ x D: 16″.
Collapsible Mid-Century Modern Walnut Magazine Rack
Minimal Mid-Century American Modern magazine rack in walnut with spindle construction. Modest form offset by sharp, dramatic lines. Collapses for easy storage when not in use.
Excellent, refinished condition.
17.75ʺW × 13.25ʺD × 18ʺH
Danish Modern Walnut and Aluminum Waste Basket
Nice Danish waste basket composed of a painted metal interior basket housed within a walnut spindle-constructed frame. Spotting / light wear to the black paint. Walnut exterior is in excellent, vintage condition.
H: 13″ x Diameter: 12.75″
Directional Mixed-Wood Dining Table by Milo Baughman
This Milo Baughman dining table was designed for Directional in the early 1960s and is composed of walnut, rosewood and English brown oak banding (original black lacquer on legs and apron is intact and is a matte finish, not polished or glossy). The table includes the two bookmatched leaves that blend seamlessly with the table when in place.
Each leaf measures 18″ long
Without the leaves: 72″ long
With one leaf: 90″ long
With both leaves: 108″ long
When fully extended, the length between the legs (horizontally) is: 77″
The length between the legs (vertically) is: 30.1″
The apron is 2″ high
W: 108ʺ × D: 39″ × H: 29.9″