AdrianPearsall
Adrian Pearsall for Craft Associates ‘Gondola’ Sofa in Walnut and Velvet
Model #2408 ‘Gondola’ sofa designed by Adrian Pearsall for Craft Associates in the 1960s. Composed of a sculpted walnut base which supports the frame. Three back cushions feature a single button / cushion, and the seat is one continuous cushion tufted and buttoned throughout. Bolsters offer additional support and comfort. Fully restored condition — walnut has been newly refinished, and sofa has been recovered in a luxurious Kravet ‘Gunmetal’ gray velvet. Foam and strapping are all new.
Additionally, we have the matching club chair Model #2406-C listed separately.
Sofa dimensions:
L: 101.1″
Height (frame): 26.5″
Height (including back cushions): 29.25″
D: 31.5″
Arm height: 20″
Arm height (with bolsters): 21.25″
Seat height: 18.25″.
Adrian Pearsall for Craft Associates ‘Wave’ Chaise Lounge in Coral Mohair
Luxurious, iconic Adrian Pearsall for craft associates (model 2147 CL) shapely récamier or chaise lounge roomy enough to accommodate two people. Recovered in a blood-orange or coral mohair with new foam. The decorative pillow attaches to the back with a snap-on strap and can be removed when not in use. Supported by four walnut, tapered legs newly refinished.
These were made in various depths; this is the deep version (67″ D x 32″ H x 37″ L).
The lowest seat height (lowest point of the tufting) is: 10″
The highest seat height (top of the leg rest ‘curve’) is: 14.25″.
Adrian Pearsall for Craft Associates Lounge Chair in Walnut and Velvet
Model #2406-C club or lounge chair designed by Adrian Pearsall for Craft Associates in the 1960s. Composed of a sculpted walnut base which supports the frame. The back cushion features a single button, and the seat is fully tufted and buttoned. Fully restored condition — walnut has been newly refinished, and chair has been recovered in a luxurious Kravet ‘Gunmetal’ grey velvet. Foam and strapping are all new.
Additionally, we have the matching ‘Gondola’ sofa (Model #2408) listed separately.
Chair dimensions:
H 26.75″
L 28.75″
D 33″
Arm height 21.25″
Seat height 17″.
Adrian Pearsall for Craft Associates Walnut Desk or Accent Chair Model #909
Uncommon model #909 dining / desk / side chair designed by Adrian Pearsall for Craft Associates. Solid walnut frame with molded plywood seat recovered in a multicolored tweed. Sculptural, modernist form with clean, exaggerated lines.
Appears with the corresponding barstool (model #907) in a 1950s Craft Associates catalog. Unmarked.
H 30.25″ x W 17″ x D 23″ x Seat Height: 17.5″
Adrian Pearsall for Craft Associates Walnut Lounge Chair and Ottoman
This rarely seen Adrian Pearsall lounge chair and ottoman set boasts a highly stylized sculpted walnut frame and armrests. Great lines and shape to both pieces. Magnificent texture and grain to the walnut, which is enhanced by the detail of the lime green tweed fabric. The Pirelli rubber straps on both chair and ottoman are new; the upholstery and foam has been replaced. Arm height of chair: 23″
Ottoman dimensions: H 16″ x W 25.25″ x D 21.5″
Chair dimensions: H: 33″ x W: 31.25″ x D: 25.5″ x Seat Height: 18″
Brutalist Four-Panel Credenza by Adrian Pearsall for Craft Associates
This unique credenza in the Brutalist style of Paul Evans was designed by Adrian Pearsall for Craft Associates and is composed of molded resin decoration in gold and bronze tones over a wooden frame. The ‘push’ latch mechanisms open and close each door with a simple motion. The doors open to reveal two fixed shelves (one/side) and a sizable middle drawer. The piece retains its original black paint on the surface, plinth base, and back, although there is minor loss to the back. The matching wall-mounted bar will be listed separately.
H: 26.25″ x W: 68.5″ x D” 17.75″
Brutalist Wall Mounted “Disc” Bar by Adrian Pearsall for Craft Associates
Brutalist wall-mounted disc bar designed by Adrian Pearsall for Craft Associates inspired by the PE-122 bar designed by Paul Evans (ca. 1970s, USA).
Bar features two doors of sculpted resin over wood concealing a cabinet with two adjustable/removable shelves and a polished chrome sheet metal backing (appearing as a mirrored back). Luxurious, striking conversation piece with rich bronze and gold tones and intriguing incorporation of abstract shapes, linear patterns, and dense textures.
There is a back lip running the length of the cabinet itself that can be mounted to a wall-mounted ledger board. We have custom cut a ledger board, which can be included with the cabinet upon request.
Very good, conservatively restored condition with only light wear remaining: there are a couple of streaks to the original paint on one side of the cabinet itself along with a bend to one side of the chrome sheet metal backing, as shown.
From the collection of a prominent New York City architect.
Overall dimensions: H: 48.38″ x L: 48.25″ x D: 12.75″ / D: (doors open) 27.75″
Cabinet exterior dimensions: 23.75″ x L: 31.75″ x D: 12″
Cabinet interior dimensions excluding removable/adjustable shelves: H: 22.5″ x L: (each section) 14.63″ x D: 11″
Pair of Midcentury Walnut Plinth Base Side Tables Attributed to Adrian Pearsall
$2,600.00Low, cube end / side tables in walnut with an ebonized plinth-base (circa 1960s, USA).
Finished on all sides, each with different walnut grain.
Refinished condition; only minor wear remains (one small repair to replace a spot of veneer loss along with minimal, general wear).
Design has been long attributed to both Adrian Pearsall and Milo Baughman, however designer is unconfirmed and pieces are unsigned.
Measures: H 13.5″ x W 16″ x D 16″.
Set of Four Adrian Pearsall #11 Iron Barstools
Rare, early set of #11 barstools designed by Adrian Pearsall for Craft Associates in the 1950s. Forged wrought iron construction with footrest and ball feet. Newly recovered in a vintage hopsack fabric. Retain the ‘Craft Associates’ tags to the underside (one complete; others partial). Seat is 12″ x 12″ square Base measures: 16″ D x 13″ L.
H: 30.5″ x W: 13″ x D: 16″
Vintage Adrian Pearsall for Craft Associates Illuminated Globe on Walnut Stand
Model #1898-G16 globe circa 1960 USA designed by Adrian Pearsall for Craft Associates. 16″ Replogle ‘Comprehensive Globe’ itself is composed of paper gores over plastic with a brass-plated meridian. The Pearsall designed base is sculpted solid walnut with two supports for the meridian. Base has been refinished; globe itself shows minor wear (light spots of soiling, few small spots of loss, light, general wear). Overall, the globe is in very nice, vintage condition and will be presented newly rewired and ready for use.
Globe diameter: 16″
Depth: 22.25″
Length: 22.75″
Height: 35″.
Vintage Sculptural Adrian Pearsall Chaise Lounge for Craft Associates
Scarce and desirable Model 1828-C Adrian Pearsall chaise lounge for Craft Associates (ca. 1950s, USA).
Composed of a deeply contoured, curvaceous seat equipped with the original, weighted head-rest, all supported by sculpted and splayed walnut tapered legs. The light taupe / beige upholstery is vintage, but not original (ca. 1970s / 1980s) and is in very good, usable condition with only minor wear (one spot of discoloration near the head rest and very light, general wear). It has been professionally cleaned. Legs retain their original glides and have been conservatively refinished.
Measures: H: 32.25″ x L: 59.5″ x D: 40.5″
Seat Height (edge of chaise): 13.5″
Seat Height (middle seat): 16.25″.