floorlamp
Set of Two “Febo” Floor Lamps in Glass and Marble by Roberto Pamio for Leucos
$22,000.00Set of two “Febo” floor lamps designed by Roberto Pamio and Renato Toso for Leucos – scarcely seen design due to its limited production. (ca. 1970s, Italy).
The floor lamp, the most impressive design of the “Febo” series, is composed of a black Murano glass dome shade with a banding of red, yellow, and transparent ‘reeds’ with a brass triple socket and stem, all supported by a conical Verona Marble base.
These visually and compositionally disparate materials have been successfully fused together to create a truly original design marrying form and function – the heft of the base provides stability while its peach tones and veined texture add a nice visual contrast to both brass and black glass.
The shades can be removed and tilted to diffuse the light accordingly.
Excellent, vintage condition – the brass stems have been polished, and the shades are nearly perfect sans two very light scuffs to one of the shades. The marble has no imperfections; the white lines and patches are naturally occurring within the stone.
Original Italian sockets, wiring, and plug (plug will be changed for US use, unless otherwise requested).
Each lamp takes three E14 bulbs – we are using three 30 Watt equivalent LED bulbs (warm/soft light bulbs used in the shorter lamp, daylight bulbs used in the taller for demonstration).
One of the shades retains the manufacturer’s label, and both brass sockets are branded “Leucos.”
The listing is for both floor lamps – one shorter than the other, but both shades are roughly the same size (due to the handblown nature of the shades, there are slight size disparities).
Taller: H: 57.5″ x Diameter: 12″ (shade height is 8.5″)
Shorter: H: 50.5″ x Diameter: 11.75″ (shade height is 7.5″)
Base Diameter: 9″
Single-Arm Counterbalance Chrome Globe Floor Lamp by Arteluce
$2,800.00Chrome floor lamp manufactured in the 1960s by Arteluce.
Composed of a single, counterbalanced arm with an adjustable globe shade and leather wrapped handle, all supported by a black enameled shaft and tripod base.
The plastic clasp has been replaced with a far superior Italian maple orb clasp of the same era.
Light enamel loss present and light scuffs to the chrome shade, as shown. Overall, very good, vintage condition.
Diameter of the globe shade: 7.25″
Diameter of base: 17.5″
Arm length including the shade: 33″
Height of stem alone: 58″
Height with the shade at the highest point and arm at the lowest: 69.25″
Provided dimensions reflect the orientation of the arm parallel with the base.
Vintage Adjustable Rectilinear Chrome Floor Lamp by Casella Lighting
$1,100.001970s chromed-steel floor lamp with rectilinear design by Casella Lighting of San Francisco, CA. Composed of an adjustable, cantilevered shade with height and 360 degree swivel adjustability. Original on / off switch present; wiring is new.
Chrome has been buffed and cleaned; light wear remains (scratches / pitting spots to base; few pit indentations to the shade).
Signed.
Measures: Height can be adjusted from 32.75″ to 50.25″
L 13″
D 6.5″
Shade alone (without the arm) measures: 6.5″ L x 2.5″ D x 2.5″ H
Shade with arm is 11.5″ L
Base: 11″ L x 6.5″ D.
Vintage Brass, Chrome and Painted Metal Adjustable Floor Lamp with Pivoting Arm
$1,200.00Mid-20th Century floor lamp in brass, chrome and painted metal (ca. 1950, USA).
Fully adjustable with a pivoting arm, height adjustable stem, and fully articulating shade.
Gold and black paint is original and shows wear (spots of losses, as shown).
Height can be adjusted from 36.38″ to 45″
Length (arm and shade): 26″
Depth: 12″ (shade diameter)
Vintage Ceramic and Brass Graduated Dual Socket Floor Lamp with Shade
$1,600.00Glamorous and unique Hollywood Regency-Style floor lamp (ca. 1960s, USA).
Composed of a graduated ceramic orb base supporting a sculptural brass column stem with dual socket design, ring finial, and round pull string adornments.
Very good, vintage condition. There is tarnish/scuffs to the unpolished brass, as shown, along with a small patch of linen loss to the shade.
Newly rewired and includes the original shade.
Dimensions including shade:
H: 69.5″ x Diameter: 13″
Height to top of finial without shade: 67.25″
Height to bottom of socket: 57.88″
Ceramic/brass base alone measures: H: 21.5″ x Diameter: 10.25″
Vintage Figural Resin ‘Tête de Femme’ Caryatid Floor Lamp After Giacometti
$4,600.00Beige floor lamp styled after Alberto Giacometti’s “Tête de femme” design, though sculpted from resin, as opposed to bronze (ca. 1970s, USA).
Depicts a feminine bust (head with upturned collar/shoulders) supporting a column resembling a Grecian Caryatid.
Elegant, figural statement piece in very good, newly restored condition.
Newly rewired, and the socket has been replaced. The shade (not original to the piece) shows light wear to the top rim.
Includes shade.
Finial height (slightly adjustable – this is the highest): 75.5″
Socket height: 65.5″
Height below socket (resin form): 62.13″
Shade dimensions – H: 13″ x Diameter: 19.13″
Lamp base diameter: 11″
Vintage Italian Space Age Sculptural Chrome and Acrylic Floor Lamp
$2,800.00Impressive Italian Space Age-Style chromed-metal floor lamp (ca. 1960s, Italy).
Composed of six shaped chrome fixtures supported by a dense chromed-metal stem and round white acrylic base. (Acrylic disc was likely a later addition added to conceal some dents to the original chrome base and can be removed.) Though, the white acrylic adds a nice contrast to the otherwise all chromed-metal lamp.
Statement piece – practical, offering plentiful light sources, while not compromising style.
Very good, vintage condition with light wear to the chrome in addition to one approximately 2″ long scratch to one of the shades, as shown.
Retains the original Italian plug, which will be changed for US use, unless otherwise requested .
H: 62.25″ x Diameter: 13.75″
Each fixture measures: H: 13.5″ x L: 5.75″
Base Diameter: 13.25″
Vintage Robert Sonneman Chrome Adjustable ‘Arc’ Lamp
$1,200.001960s Robert Sonneman floor lamp featuring an arching arm, which connects the chrome ball fixture to the stem – all supported by a painted-steel, circular base. The arm height is adjustable, lowering the overall height from 75″ to 68″, and swivels in a full 360 degree rotation.
Stylish, practical design, which offers an easy transference of the light source (arm glides effortlessly along its axis).
There is minor wear to the chrome (light pitting to the arm and a couple of scuffs to the shade along with general wear). Overall, the lamp is in very nice, vintage condition. It will be presented newly rewired and ready for immediate use.
Width: 26.5″
Depth: 11.75″ (diameter of the base)
Height can increase from 68″ to 75″
Fixture diameter: 6″.
Vintage Slate and Teakwood Studio Craft Floor Lamp by Harspwell House
$1,600.00Vintage floor lamp (shade is not included) composed of a rectangular teak column supported by a footed rectangular base constructed using Harpswell House’s patented process of laminating inlaid wood (teak in this case) with ‘300 million year old’ black slate (Maine, USA).
Though unlabeled, the base is undoubtedly Harpswell House who, in addition to small household items, sold table lamps in inlaid wood and slate. This floor version is believed to be a custom order circa 1964-65. No other floor lamp examples have been documented.
Handsome, studio craft piece in the New Hope Style of woodworkers including Phillip Lloyd Powell and Emil Milan, who crafted minimalistic designs from indigenous woods to showcase the materials. The modest form of the lamp pairs nicely with the vibrant grain of the wood and the sleek color and material contrast of the slate.
Very good, conservatively refinished condition; spots/scuffs to the wood and slate remain, and one small chip is present to the wood directly above the base on one side.
Shade is for demonstration only and is not included, though the lamp with the shade measures H: 63″ x Diameter: 14″ (for perspective only)
Lamp height (teak stem and slate base alone): 48.63″
Lamp height (socket): 50.75″
Lamp height (finial): 61″
Base: L: 7″ x D: 7″









